GearReg

The rigging register your crew will keep up to date

GearReg is a lifting equipment register for slings, shackles, chain blocks and hoists, inspected on a phone at the truck or the crane. Each pass names the tag to fit. Each fail goes on the out of service register with a photo.

Lifting gear inspection checklists

Every new company starts with these categories. Rename them, add your own, and edit any checklist.

CategoryThe first checks on its list
PulleyNo cracks, deformation, bending or sharp edges. No corrosion, pitting or excessive wear. Gate / moving parts open, close and lock correctly.
Shackle / rigging hardwareNo cracks, deformation, bending or sharp edges. No corrosion, pitting or excessive wear. Gate / moving parts open, close and lock correctly.
Wire rope slingNo broken wires beyond discard criteria. No kinks, birdcaging, crushing or core protrusion. No corrosion, heat damage or arc strikes.
Synthetic lifting sling (round / flat webbing)Webbing / cover free of cuts, tears, abrasion or exposed core yarns. Stitching intact, no pulled, cut or worn threads. No burns, melting, heat glazing or chemical contamination.
Chain slingLinks free of cracks, nicks, gouges, bending or twisting. No stretch or wear beyond discard criteria. No corrosion, heat damage or weld spatter.
Chain block / hoist / winchHooks free of cracks or stretch, safety latches work. Chain / rope free of wear, stretch, twists or damage. Brake holds load correctly.
Extension lead / flexible cordPlug, socket and cord free of cracks, burns or damage. Outer sheath not cut, abraded, twisted or squashed; no inner cores showing. Cord anchorage secure at both ends; no loose or exposed conductors.
Power tool, Class I (earthed)Plug, socket and cord free of cracks, burns or damage. Outer sheath not cut, abraded, twisted or squashed; no inner cores showing. Cord anchorage secure at both ends; no loose or exposed conductors.
Power tool, Class II (double insulated)Plug, socket and cord free of cracks, burns or damage. Outer sheath not cut, abraded, twisted or squashed; no inner cores showing. Cord anchorage secure at both ends; no loose or exposed conductors.
Portable RCD / power boardPlug, socket and cord free of cracks, burns or damage. Outer sheath not cut, abraded, twisted or squashed; no inner cores showing. Cord anchorage secure at both ends; no loose or exposed conductors.
Generator / portable outlet deviceHousing, outlets and controls undamaged. RCD protection fitted and test button trips. Earthing arrangement in place.
Other electrical equipmentPlug, socket and cord free of cracks, burns or damage. Outer sheath not cut, abraded, twisted or squashed; no inner cores showing. Cord anchorage secure at both ends; no loose or exposed conductors.
Torque wrench / toolInstrument clean, undamaged and complete. Identification / serial number legible. Calibration certificate checked: correct instrument, range and results.
Gas detectorInstrument clean, undamaged and complete. Identification / serial number legible. Calibration certificate checked: correct instrument, range and results.
Multimeter / electrical test instrumentInstrument clean, undamaged and complete. Identification / serial number legible. Calibration certificate checked: correct instrument, range and results.
Load cell / dynamometerInstrument clean, undamaged and complete. Identification / serial number legible. Calibration certificate checked: correct instrument, range and results.
Pressure gaugeInstrument clean, undamaged and complete. Identification / serial number legible. Calibration certificate checked: correct instrument, range and results.
Other calibrated instrumentInstrument clean, undamaged and complete. Identification / serial number legible. Calibration certificate checked: correct instrument, range and results.

The inspector decides

The checklist for that type of gear is on screen at the moment of decision. Passing asks the inspector to confirm that every condition is acceptable.

  • Its own intervalGive a category its own interval, such as 12 months for chain blocks, with a dated tag.
  • Service lifeSet a life in years for a category and items past it cannot be passed.
  • Out of serviceFailed gear is tagged out with the reason and a photo, then tracked to disposal or repair.
  • ProjectsWhen a client sets its own rules for a site, inspections on that project follow them.
The GearReg inspection screen for a chain sling: its details, a Height safety only tick box, and the question Does this equipment pass inspection, with the checklist below.

Gear by vehicle, crane or store

Record where each item is kept. Inspecting an item at a different location moves it.

  • What is overdue, and whereEach location shows what is in date, due within 30 days, needing inspection or out of service.
  • Start from your spreadsheetImport locations and gear from Excel. Imported gear shows as not inspected until its first inspection in the app.
  • Head contractor sitesPut your gear on a head contractor's site register with one invitation code.
  • Reports for your clientsDownload the register as a PDF or Excel file with your logo. See the sample reports.

Try it on your own gear

GearReg is free at the start of the roll-out. Bring one crew and one truck's worth of gear and see how long a round of inspections takes.